Page 2
IMPORTANT NOTICE Read the instruction manual thoroughly prior to using the unit. Keep this manual for future reference. Keep the packaging so that the unit can be shipped in the original packaging in order to avoid damage. ...
Page 3
Whats Included: 1x AVE 4-Ray Laser Projector 1x Australia IEC Mains Power Cable 1x 4-Ray User Guide Installation and use: Unpack the unit. Ensuring all packaging is removed from the machine Connect to mains power and turn power on. Set the fixture to the desired mode / program via the dip-switch control panel located on the back.
Page 4
If the output beam direction is skewed or of centre, reset the unit. If problem persists return to place of purchase for calibration. If the unit fails, power OFF and wait 5 minutes before powering on again. If you come across additional problems contact AVE on (03) 9706 5325...
Need help?
Do you have a question about the 4-RAY and is the answer not in the manual?
Questions and answers