Factory Menu - TCL L40E5800US Service Manual

Factory Test & Alignment Specification For RT95-AP Series (V1.0)

2.2 Factory Menu

Name
Factory hotkey
Warm up
White Balance
Shop
NVM Reset
Power On Mode
USB Clone
Preset Factory
Channel
DeviceID test
Other
SW NO.
Project Name
SIACP Version
Date
Default
Factory Menu shortcut button switch
OFF
The item must be disabled (OFF) after production
Aging mode, mainly used for factory aging.
OFF Press "Menu" key on keyboard to exit the burning mode.
See Appendix 1 "Warm-up Test"
.. White Balance Adjustment ( see details below)
It is crucial that the function is executed after production aim to clear information
> of production process, ensure user cannot access to Factory Menu after
executing the item.
Restore default value except WB, ADC data.
>
ON: the set will power on after switching on power.
STB: the set will remain standby status after switching on power.
STANDBY Last: the set will turn to the status in which it lies when last switching off.
If without requirement from certain customer, by default, the Setting should be
STANDBY
Select to choose the things you want to clone.
..
Preset the channel table of factory. To preset the channel table of certain factory,
.. first, choose the corresponding factory name. Then press OK button of remote
control and wait OK is displayed on the screen.
Test device ID.
DO
Project Information
Version information of Main Software
device info
Product model
device info
Serial port remote control protocol
device info
Release date and time of main software
device info
Factory Menu
Description
6