Advertisement
Power supply IC's
13. Mounting the power supply IC's
INSPECT ALL MOUNTED COMPONENTS THOROUGHLY!
Mount both IC's on the PCB, the metal back pointed towards the PCB's edge. Take care to use the entire
length of the connectors, this avoids making it necessary to shorten the connectors (fig. 1.0).
Next, bend the IC's as shown in fig. 2.0 and then as in fig. 3.0. Watch the distance between the lower
surfaces of the PCB and the IC.
6mm
Fig 1.0
Fig 2.0
Fig 3.0
metal back
9
Advertisement
