Beko DSF5240M00W User Manual page 47

Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting
The refrigerator runs too often or for too long.
• The new product may be larger than the previous one. Larger products will run for
longer periods.
• The room temperature may be high. >>> The product will normally run for long
periods in higher room temperature.
• The product may have been recently plugged in or a new food item is placed
inside. >>> The product will take longer to reach the set temperature when recently
plugged in or a new food item is placed inside. This is normal.
• Large quantities of hot food may have been recently placed into the product. >>>
Do not place hot food into the product.
• The doors were opened frequently or kept open for long periods. >>> The warm
air moving inside will cause the product to run longer. Do not open the doors too
frequently.
• The freezer or cooler door may be ajar. >>> Check that the doors are fully closed.
• The product may be set to temperature too low. >>> Set the temperature to a higher
degree and wait for the product to reach the adjusted temperature.
• The cooler or freezer door washer may be dirty, worn out, broken or not properly
settled. >>> Clean or replace the washer. Damaged / torn door washer will cause the
product to run for longer periods to preserve the current temperature.
The temperature in the cooler or the freezer is too high.
• The cooler compartment temperature is set to a very high degree. >>> Temperature
setting of the cooler compartment has an effect on the temperature in the freezer
compartment. Wait until the temperature of relevant parts reach the sufficient level
by changing the temperature of cooler or freezer compartments.
• The doors were opened frequently or kept open for long periods. >>> Do not open
the doors too frequently.
• The door may be ajar. >>> Fully close the door.
• The product may have been recently plugged in or a new food item is placed inside.
>>> This is normal. The product will take longer to reach the set temperature when
recently plugged in or a new food item is placed inside.
• Large quantities of hot food may have been recently placed into the product. >>>
Do not place hot food into the product.
Shaking or noise.
• The ground is not level or durable. >>> If the product is shaking when moved slowly,
adjust the stands to balance the product. Also make sure the ground is sufficiently
durable to bear the product.
• Any items placed on the product may cause noise. >>> Remove any items placed on
the product.
The product is making noise of liquid flowing, spraying etc.
• The product's operating principles involve liquid and gas flows. >>> This is normal
and not a malfunction.
There is sound of wind blowing coming from the product.
• The product uses a fan for the cooling process. This is normal and not a malfunction.
Refrigerator / User manual
47 / EN

Advertisement

Table of Contents
loading

Table of Contents