Captive Portal; Basic Configuration Page; Table 9: Basic Configuration Page - Grandstream Networks GWN7610 User Manual

https://arttel.ru/
Captive Portal feature on GWN7610 Access Points allows to define a Landing Page (Web page) that will
be displayed on Wi-Fi clients' browsers when attempting to access Internet. Once connected to GWN7610
AP, Wi-Fi clients will be forced to view and interact with that landing page before Internet access is granted.
The Captive Portal feature can be configured from the GWN7610 Web page, by navigating to "System
Settings > Captive Portal".
The page contains three tabs: Basic, Files and Clients.

Basic Configuration Page

The basic configuration page contains options to enable/disable the captive portal feature, related firewall
rules and timeout settings. The following table describes all the settings on this page:
Field
Enable
Max Clients
Client Idle Timeout (min)
Client Force Timeout (min)
Authenticated User Rules
https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610

CAPTIVE PORTAL

Table 9: Basic Configuration Page

Description
Check this option to enable/disable the captive portal feature.
If disabled, configuration and uploaded files will not be lost.
If enabled, Wi-Fi users will be redirected to defined landing page
before accessing Internet.
Specifies the maximum number of clients that can connect to the
network via the captive portal feature.
Configures the time of inactivity after which the client will be
automatically de-authenticated.
Valid range between 10 to 240. Default is 30 min.
Configures the time after which the client will be automatically de-
authenticated without considering his status (active or idle).
Valid range between 10 to 240. Default is 60 min.
Defines and manages rules for traffic from Router to Authenticated
Users.
Default/Typical Authenticated User Rules:
•
Allow TCP port 22
This rule allows traffic over TCP on port 22 (SSH)
•
Allow TCP port 53
GWN7610 User Manual
P a g e | 42