Canon LASER SHOT LBP-1210 User Manual page 6

FCC Notice (220–240 V model)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
• Use of shielded cable is required to comply with Class A limits in
Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless
otherwise specified in this guide. If such changes or modifications should
be made, you could be required to stop operation of the equipment.
Notice for EMC Directive (220–240 V model)
"This equipment has been tested in a typical system to comply with the
technical requirements of EMC Directive."
• Use of shielded cable is necessary to comply with the technical
requirements of EMC Directive.
International E
As an E
meets the E
The International E
international program that promotes energy saving through the use of
computers and other office equipment. The program backs the
development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which
business proprietors can participate voluntarily. The targeted products are
office equipment such as computers, monitors, printers, fax machines,
and copiers. Their standards and logos are uniform among the
participating nations.
S
NERGY TAR
S partner, Canon Inc. has determined that this product
NERGY TAR
S guidelines for energy efficiency.
NERGY TAR
NERGY
Office Equipment Program
S Office Equipment Program is an
TAR
v