LG WM3360H CA Series Service Manual page 34

VIBRATION & NOISE IN SPIN
Have all the transit bolts
and base packing been
removed?
Base Packing
Yes
Is the washer installed on a
solidly constructed floor?
Yes
Check if the washer is
perfectly level as follows:
Check the leveling of the
washer with a level and
check that the washer is
stable.
Level
All manuals and user guides at all-guides.com
Put an unbalance part
(rubber) inside of drum
and start QC test mode and
run in high spin.
Remove the
(Refer to section 7-2.)
No
transit bolts
When the machine is
and Base
spinning in high speed,
packing.
verify that it is stable.
Unbalance Part
If you do not have the
unbalance part, put 4.5 to
6.5 lbs (2 to 3 kg) of
clothing. Once loaded,
press power, Rinse+Spin
and the start/pause button
Move the
No
in sequence.
washer or
When the machine is
reinforce the
spinning in high speed,
floor.
verify that it is stable.
If it is not stable, adjust feet
accordingly. After the
washer is level, tighten the
lock nuts up against of the
base of the washer. All lock
nuts must be tightened.
33
Yes
Higher
Tighten
Adjustable feet
Lower
Tighten
Adjustable feet