Wmbh - Wall Mount Battery Holder - Proflame 1 And 2 Ipi Models - Option - Barbara Jean OFP4336S1 Manual

WMBH – Wall Mount Battery Holder – Proflame 1 and 2 IPI Models - Option
- NOT FOR USE WITH POWER VENTS -
Parts List:
[1] Battery Holder
[1] DCHS Mount Bracket
[1] Wall Mount Cover Plate
[1] 16 ft. Wiring Harness
Proflame 2:
-Plug the Square Plug Connector
into the User Interface Socket in the
P2 Module.
-Plug the Battery Connector into
Battery Holder connection on the
Proflame 2 wiring harness.
Wall Mount Battery Holder
 The Battery Holder can be mounted on a
vertical wall stud using the DCHS as a mounting
bracket.
 Ensure that the face is protruding 1/2" so that
the face plate will be flush on the face of the
wall.
 Drywall cutout size is 2" wide by 4-1/8" tall.
 Must be installed within 16ft of valve assembly
(12ft recommended).
Proflame 1:
-Plug Battery Connector into Battery
Holder connection on wiring harness.
-The Square Plug Connector on the
16ft wiring harness is not used.
38