Canon iR2230 Printer Manual page 53

PDL UFR II DL Mem. Full
Cause There is not enough memory to register the character set.
Remedy Set the Graphics Mode in the UFR II printer driver to 'Raster Mode' and print the data again.
(See the Help function on the UFR II printer driver.)
* If Auto Continue is selected, this error is skipped automatically.
PDL UFR II Version Err
Cause A job has been sent from a version of the UFR II printer driver that is not compatible with this
machine.
Remedy Change the printer driver version and print the data again.
PDL Warning
Cause An internal error has occurred for the printer function.
Remedy Perform a printer reset to try to initialise the function again. If this error persists, contact your
local authorised Canon dealer.
PDL IMG Initial. Err
Cause An error occurred during the initialisation of the function.
Remedy Cancel the job and then perform a printer reset to initialize the function again. If this error
persists, contact your local authorised Canon dealer.
PDL IMG Process. Error
Cause An error occurred while processing data.
Remedy Cancel the job and then perform a printer reset to initialize the function again. If this error
persists, contact your local authorised Canon dealer.
When a Message Is Displayed
Error Skip
Error Skip
3
3-3