Canon iR2230 Printer Manual page 37

IMPORTANT
Please note that the memory of the machine can store up to 8,000 pages. When you send a
secured document to be stored in the memory to be printed at a later time, and the memory is full
(already reached its maximum capacity), your document will not be stored. The memory may be
full because the machine is being used for other functions (such as storing a document in an
inbox or storing a form) or other jobs, which use memory space.
NOTE
[Rotate+Collate] and [Rotate+Group] are available for selection if the paper size is A4, A4R,
JIS-B5, JIS-B5R, LTR, or LTRR.
If [Rotate+Collate] or [Rotate+Group] is selected, part of the print image may be cut off when the
image is rotated. You need to load the same size paper as the original in the paper drawers in
both landscape and portrait positions. If you do not, all the sheets will be printed in the orientation
that the loaded paper is in.
[Offset+Group] and [Offset+Collate] are available for selection in combination with the following
optional units and paper sizes.
- If the Finisher-S1 is attached: A3, JIS-B4, A4, A4R, JIS-B5, 11" x 17", LGL, LTR, or LTRR.
- If the Finisher-Q3 or Saddle Finisher-Q4 is attached: A3, JIS-B4, A4, A4R, JIS-B5, A5, 11" x
17", LGL, LTR, LTRR, STMT, or EXEC.
When you select [Staple+Collate], you can select the stapling position.
Corner Double
(Upper-Left) (Top)
ABC ABC
ABC ABC
Corner Double
(Lower-Right) (Bottom)
ABC ABC
ABC ABC
When you are stapling paper in landscape orientation, the image orientation and the staple
position may not match.
Corner Double
(Upper-Right) (Right)
ABC ABC
ABC ABC
Corner Double
(Lower-Left) (Left)
ABC ABC
ABC ABC
2-17
Settings Menu
2