Bissell PROHEAT 2X 66Q4 User Manual page 20

Bissell vacuum cleaner user manual
Table of Contents

Advertisement

T
roubleshooting
Reduce Spray or No Spray (continued)
Possible Cause
1. Water tank may be empty.
2. Formula tank may be empty.
3. Tank may not be seated completely.
4. Pump may have lost prime.
DirtLifter PowerBrushes do not turn
Possible Cause
1. The brush is off or broken.
2. The unit is in the upright position.
3.
Circuit breaker may have tripped.
Cleaner not picking up solution
Possible Causes
1. ReadyTools dial may be at wrong setting.
2. Tank may not be seated properly.
3. Tank may not be assembled properly.
4. Solution or 2-in-1 water tank is empty.
5. 2-in-1 water tank has picked up
maximum dirty water and red float
door has closed.
6. Red float "door" in the tank may have closed
as a result of bumping an object or moving
machine back and forth too quickly.
20
w w w . b i s s e l l . c o m
Remedies
1. Fill heavy duty bladder with hot tap water.
2. Fill formula tank with BISSELL Multi-
Allergen Formula for cleaning.
3. Turn power OFF ( O ). Remove and
reseat tank.
4. Turn power OFF ( O ) and then back
ON ( I ). Wait one minute, then
depress Trigger.
Remedies
1. Turn power OFF ( O ) and unplug unit
from outlet. Follow instructions on
page 17.
2. Brushes only rotate when unit is
reclined using the detent pedal.
3.
Turn the machine OFF ( O ) and
unplug from outlet. Check to see if
foreign object is caught in brush roll.
Remove object. Plug machine back in
to reset circuit breaker.
Remedies
1. Set ReadyTools dial to either FLOOR
CLEANING or TOOLS setting.
2. Pick up both the 2-in-1 water
tank and formula tank and reseat
them so they fit snugly on the unit.
3. Check to make sure the "lip" of
the nozzle is securely hooked
into the groove on bottom of
Tank (see page 9).
4. Check fluid levels in heavy duty
bladder and formula tank.
5. Empty 2-in-1 water tank. Refill
heavy duty bladder with clean
hot tap water and replace.
6. Turn the machine OFF ( O ),
allowing red float door to release into
the open position. Turn unit back
ON ( I ) to continue cleaning. Be
sure your forward and backward
strokes are done at a slower pace.
8 0 0 . 2 3 7 . 7 6 9 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents