Pioneer SPH-10BT Firmware Update Instructions page 2
Smartphone receiver
Hide thumbs
Also See for SPH-10BT:
- Operation manual (35 pages) ,
- Installation manual (33 pages) ,
- System firmware update instructions (7 pages)
Advertisement
Procedure:
1.
Start the vehicle engine (in an open, well-ventilated area).
2.
If AV Source is On, press and hold SOURCE(MUSIC)/OFF to set the unit Source OFF.
3.
If Pioneer Smart Sync is connected, disconnect.
4.
Press and hold Application Launch to display the "Initial" menu, then press to confirm.
5.
Press> repeatedly to select "UPDATE", then press Application Launch to confirm.
6.
Select "S/W VERS," to confirm the system info.
7.
After the "S/W VER" screen appears, check the firmware version.
8.
Verify that the firmware on your unit is not already firmware version 08.27.
Advertisement
