Other Features; Set Alarm Timer; Set Sleep Timer; Listen To External Audio Device - Philips MCM2000 User Manual

6 Other features

Set alarm timer

This unit can be used as an alarm clock. You can
select DISC, TUNER, or USB as alarm source.
Note
‡
Make sure that you have set the time correctly.
1
In standby mode, press and hold
SLEEP/TIMER until [TIMER SET](timer
VHW VFUROOV RQ WKH GLVSOD\
» [SELECT SOURCE] VHOHFW VRXUFH
scrolls on the screen.
2
Press SOURCE repeatedly to select a
source: DISC, USB, or TUNER.
3
Press SLEEP/TIMER WR FRQÀUP
» The hour digits are displayed and begin
to blink.
4
Press / RU 92/  UHSHDWHGO\ WR VHW
hour, then press SLEEP/TIMER again to
FRQÀUP
» The minute digits are displayed and
begin to blink.
5
Press / to set minute, then press
SLEEP/TIMER WR FRQÀUP
» VOL YROXPH LV GLVSOD\HG DQG EHJLQV
to blink.
6
Press / to adjust volume, then press
SLEEP/TIMER WR FRQÀUP
»
is displayed.
Activate/deactivate alarm timer
1
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
» If timer is activated,
All manuals and user guides at all-guides.com
is displayed.
Tip
‡
Alarm timer is not available in MP3 LINK mode.
‡
If DISC/USB source is selected, yet no disc is placed or
no USB connected, the system switches to the tuner
source automatically.

Set sleep timer

1
When the unit is turned on, press
SLEEP/TIMER repeatedly to select a time
SHULRG LQ PLQXWHV 
» When sleep timer is activated,
displayed.
» To deactivate sleep timer, press
SLEEP/TIMER again until
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through this unit.
1
Connect the audio device.
‡ For audio device with headphone
sockets:
Connect MP3 Link cable to the MP3
LINK socket and to the headphone
socket on the audio device.
2
Select MP3 LINK source.
3
Play the device.

Listen through headphone

Plug a headphone into the
is
disappears.
socket on the unit.
EN 15