Next 855257 Assembly Instructions Manual

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed
unless the item is found to be faulty. Should you need to return the unassembled product,
please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple
step-by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 02 persons is required to assemble this product.
• Wall fixings are not included.
• WARNING: Children can become trapped between the bed and the wall. To avoid risk of
serious injury the distance between the top safety barrier and the wall shall not exceed 75mm or
shall be more than 230mm.
• WARNING: Do not place this child's bed near heat sources, windows and other furniture.
• WARNING: Do not use this child
• Ensure not to leave items such as ropes, strings, cords, harnesses and belts attached to or
hung to the bunk/high bed due to the risk of strangulation.
• Do not use this item if any structual part is broken or missing.
• High beds and the upper bed of bunk beds are not suitable for children under six years due to
from falls.
risk of injury
• Children are likely to play, bounce, jump and climb on beds, therefore the child's bed should
not be placed too close to other furniture or windows, and should be placed either tight to any
wall or have a gap of 300mm between the wall and the side of the bed.
855257, PINE BUNK
ASSEMBLY INSTRUCTIONS.
bed if any part is broken, torn or missing.
's
Page 1 of 6