Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Glem CK90TBLED
Summary of Contents for Glem CK90TBLED
- Page 1 Square profile 90cm rangehood INSTRUCTION MANUAL AND INSTALLATION GUIDE Please read this guide before installing and using the hood Glem Gas Australasia Pty Ltd 48 Percy Street Auburn, NSW 21442 PO BOX 63 Blaxcell PO South Granville NSW 2142 www.glemgas.com.au...
-
Page 3: Recommendations And Suggestions
Product Specification & Technical Parameters Model CK90TBLED Rated Voltage 230V Rated Power Frequency S0Hz Light Power lx20W MAX Motor Power 230W Total Power 250W Motor Single Diameter of Outlet Adapter 150mm Dimension (mm) W900X DS00 X H570min/1050max RECOMMENDATIONS AND SUGGESTIONS... -
Page 4: Important Operation Notes
IMPORTANT OPERATION NOTES • This range hood has been designed only for domestic use. • Never use the hood for purposes other than the extraction of kitchen smells during domestic cooking. • Never leave high naked flames under the hood when it is in operation. •... - Page 5 TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. b) Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) to prevent back drafting.
-
Page 6: Installation And Use
INSTALLATION & USE OPERATION OF CONTROLS light on/off booster The hood is operated using the touch control panel. The on/off symbol controls the hood power on and off. The light symbol turns the shadow proof light on and off. The fan symbols control the fan speed on 3 settings, low, mid speed and booster for stir frying type applications. -
Page 7: Electrical Installation
ELECTRICAL INSTALLATION Electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and standards. This range hood must be properly earthed. Turn off electrical power at power board before wiring. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. -
Page 8: Install Filters
5. Secure the flue chimney mounting bracket to the wall using (2) ST 2.9 x 14mm mounting screws and wall anchors. 6. Raise the flue chimney top until its holes align with holes in the chimney mounting bracket (located on the wall). 7. - Page 9 (2) Filler 3. Optional charcoal filter (optional), lock it until the stop click is heard. Optional (2) M4*10 Install grease filter after charcoal filter is installed.
-
Page 10: Warranty Form
THE ORIGINAL PURCHASER. Glem Gas Australasia Pty Ltd, during the period of warranty, will at its option, and subject to the terms and oonditions stated below, repair or replace free of charge this appliance or any component part, which upon examination by Glem Gas Australasia Pty Ltd.
Need help?
Do you have a question about the CK90TBLED and is the answer not in the manual?
Questions and answers