Table of Contents
Advertisement
3-THREAD OVERLOCK (5mm-7mm)
FABRIC:
NEEDLES:
THREAD:
PRESSER FOOT:
Instruction Manual pg._____
Bernette
Advanced Guide Workbook pg.____
Serger Library – Tips and Tricks
Using the Small Screwdriver and Brush/Needle Inserter, remove the Center
Needle.
Snug the Needle Set Screw after removing the Needle.
Following the diagrams on page ____ in the Instruction Manual, thread the
serger for a 3-thread wide Overlock stitch.
Turn the Stitch Selection Dial to "A" on the Stitch Display Panel.
Adjust Cutting Width to 2 (normal).
Adjust Stitch Length to 2.5 (normal).
Fold the fabric in half to 2 ½" X 6".
Serge along the folded edge of the fabric.
Trim and mount the sample.
Medium weight fabric 5" X 6"
80/12 Universal
3 cones of serger thread
Standard
1999 BERNINA Of America
Section C - page 3
Advertisement
Table of Contents
