Table of Contents
Advertisement
FABRIC:
NEEDLES:
THREAD:
PRESSER FOOT:
Instruction Manual pg.___
Bernette
Advanced Guide Workbook Supplement I pg.___
Feet-ures Unit ___pg.___
Serger Library – Tips and Tricks
Attach the Upper Looper Converter.
Turn the Stitch Selection Dial to "E".
Following the instructions on page ___ of the Instruction Manual thread the
serger for a 2-thread Flatlock Stitch using the Left Needle. Use Jeans Stitch
in the Lower Looper.
Adjust Stitch Length for 2.5.
Attach the Right Hand Seam Guide and position the guide halfway between the
Left Needle and the Stitch Finger.
Fold the fabric in half to 2" X 6".
Place the fabric under the Presser Foot and against the Right Hand Seam Guide.
Serge along the fold. The Looper threads should loop off the edge of the fold.
Pull the fabric flat. If the fabric doesn't lay flat, move the guide closer to the
Left Needle and try again.
Press, trim and mount the sample.
2-THREAD FLATLOCK
Medium weight cotton 4" X 6"
80/12 Universal
1 cone of serger thread (Needle)
1 cone Jeans Stitch
Standard
Specialty Stitches
Simply Serging
1999 BERNINA Of America
(Lower Looper)
Section D - page 5
Advertisement
Table of Contents
