Table of Contents
Advertisement
Information item
Source
Input Signal
Resolution
Refresh Rate
Sync Info
Status
Serial Number
Event ID
Event ID Code List
Parent topic:
Event ID Code List
If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the
solution to the projector problem associated with the code.
Event ID code
0432
0435
0433
0434
0481
0482
0485
0483
04FE
Description
Displays the name of the port to which the current input source is
connected
Displays the input signal setting of the current input source
Displays the resolution of the current input source
Displays the refresh rate of the current input source
Displays information that may be needed by a service technician
Displays information about projector problems that may be needed
by a service technician
Displays the projector's serial number
Displays the Event ID number corresponding to a specific projector
problem; see the list of Event ID codes
Adjusting the Menu Settings
Cause and solution
The network software did not start. Turn the projector off and then on again.
Cannot display the transferred images. Restart the network software.
Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
The network software quit unexpectedly. Check the network communication status,
then turn the projector off and then on again.
167
Advertisement
Table of Contents
