Cleaning And Maintenance; Cleaning The Air Purifier Exterior - Samsung AX350 935 Series User Manual

Cleaning and Maintenance

Be sure to disconnect the power plug from the socket before cleaning the product.

Cleaning the air purifier exterior

• Dampen a soft cloth with lukewarm water and wring it out, and then wipe the product exterior with it.
• Use cotton swabs to wipe the grooves on the rear panel.
• If it is hard to remove dust on the front or rear panel, remove the panel and wash it with water.
CAUTION
• Do NOT wipe the product with an alkaline detergent or disinfectant.
• Do NOT wipe the product surface with sulphuric acid, hydrochloric acid or organic solvent (e.g., thinner,
kerosene, acetone). Do NOT attach a sticker to the surface. The product surface may become damaged.
Cleaning the sensor unit
Cleaning and drying the front panel
Front mesh
• Use a vacuum cleaner to clean the area around the
sensor. If the sensor is contaminated with dust or other
foreign material, a high PM concentration may be
detected.
CAUTION
• Do NOT put dust into the sensor inlet.
STEP 1 Removing the front panel
• Hold both upper sides of the front panel and pull
towards yourself.
• Remove the clip wire from the front of the main unit.
STEP 2 Removing the front mesh
• Turn the front panel over.
• Hold the pulls in the upper portion and remove the
mesh.
STEP 3 Cleaning and drying the front mesh
• Use water or a soft cloth to remove dust and other foreign
material on the front panel.
• If you cleaned the front mesh with water, dry it thoroughly
before attaching it to the product.
CAUTION
• The frame incorporates the display PBA.
Ensure that the frame does not come in contact with
water. Contact with water causes device failure.
23
English