Table of Contents
Advertisement
5-second press
Mode
Smart
Fan speed
1 outlet /
High
3 outlets
Medium
1 outlet
Low
1 outlet
3 outlets
Example of PM10 level indication
125
Smart
PM10
Example of GAS level indication
GAS
Smart
Air outlet setting
While in Smart mode with high fan speed, change the number
of air outlets if necessary.
• Press and hold the [ ] and [
5 seconds. 'Blow air from 1 side' appears on the front display.
When you change the fan speed to High while in Smart mode,
the number of air outlets automatically changes from 3 to 1.
• If the number of air outlets is set to 1 and you press and hold
High fan
the [ ] and [
speed
from 3 sides' appears on the front display. Subsequently when
you change the fan speed to High while in Smart mode, the
3 outlets
number of air outlets changes from 1 to 3.
-
• The changed setting is maintained even after the device is
-
turned off and on again.
NOTE
1 outlet
• When the fan speed is Medium or Low while in Smart mode,
the number of air outlets does not change automatically.
• In modes other than Smart mode, the setting is displayed
and can be changed, but the number of air outlets does not
change automatically.
Checking air quality
The concentrations of PM10, PM2.5 and PM1.0 are shown,
and the air quality and GAS level are shown with colour
indicators, depending on the PM10, PM2.5, PM1.0 and GAS
levels.
• Among PM10, PM2.5, PM1.0 and GAS, the value with the worst
air quality is displayed.
– If all items have low values, the concentrations of PM10,
• Air quality levels
Pollution level
Very poor
Moderate Green
• PM10, PM2.5 and PM1.0 measurement will be displayed in
numbers 05-999.
] buttons for more than 5 seconds, 'Blow air
PM2.5 and PM1.0 are displayed in turn for 10 seconds each.
PM10
concentration
(㎍/m³)
Red
151 and over
Poor
Yellow
81 - 150
31 - 80
Good
Blue
30 and below
] buttons for more than
PM2.5 / PM1.0
Gas
concentration
pollution
(㎍/m³)
level
76 and over
4
36 - 75
3
16 - 35
2
15 and below
1
English
21
Advertisement
Table of Contents
