Memory Back Up Function; Caution For Transport Or Movement; Resetting The Microcomputer - Kenwood RD-C414-S Service Manual

RD-C414/LS-C414
SYSTEM
C-414-S
C-414-W
The marking of products using lasers
The marking this product has been classifed as Class 1. It means that
there is no danger of hazardous radiation outside the product.
Location: Back panel
Information on Disposal of Old Electrical and Electronic
Equipment and Batteries (applicable for EU countries that
have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out
wheeled bin) cannot be disposed as household
waste.
Old electrical and electronic equipment and
batteries should be recycled at a facility capable of
handling these items and their waste byproducts.
Contact your local authority for details in locating a
recycle facility nearest to you.
Proper recycling and waste disposal will help
conserve resources whilst preventing detrimental e
ects on our health and the environment.
Notice: The sign "Pb" below the symbol for batteries
indicates that this battery contains lead.
Windows Media is a trademark of Microsoft Corporation registered in
the U.S. and other countries.
SDHC logo is a trademark of SD-3C,LLC.
"Made for iPod," and "Made for iPhone" mean that an electronic
accessory has been designed to connect specifically to iPod, or iPhone,
respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or iPhone may
affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks
of Apple Inc., registered in the U.S. and other countries.
Manufactured under license from DTS Licensing Limited. DTS is a
registered trademark & the DTS Logos and Symbol are trademarks of
DTS, Inc. c 1996-2009 DTS, Inc. All Rights Reserved.
2
System
RECEIVER SPEAKER
RD-C414-S LS-C414-S
RD-C414-W LS-C414-W
Caution
CLASS 1
LASER PRODUCT
Dealer's Lock
1. Setting
To set the unit to Dealer's Lock, hold down the [STOP] key on
the main unit in the standby mode, and press the [OPEN/
CLOSE] key for 2 seconds.
2. Canceling
To cancel Dealer's Lock, hold down the [STOP] key on the
main unit, and press the [OPEN/CLOSE] key for 2 seconds.

Memory back up function

Please note that the following items will be deleted from the
unit's memory if the power cord is disconnected from the AC
outlet.
• Input selector settings
• Volume level
• Sound control (preset equalizer, bass enhancement)
• Tuner setting

Caution for transport or movement

Before transporting or moving the system, prepare it as de-
scribed below.
(1) Disconnect the external components including the USB
device, and also take out the disc.
(2) Select "CD" as a source, press the [ /II] key, and wait to
confirm "NO DISC" is displayed.
(3) Wait a while, and then turn the system OFF.
(4) If any other external component is connected, make sure
that it is turned OFF before disconnecting the connection
cable.

Resetting the Microcomputer

The microcomputer may malfunction (unit cannot be operated,
or shows an erroneous display) if the power cord is unplugged
while the power is ON, or due to some other external factor. If
this happens, execute the following procedure to reset the mi-
crocomputer and return the unit to its normal operating condi-
tion.
When the power is off (standby mode), press the [SOUND]
key on the main unit until "FACTORY RESET " appears.
Unplug the AC cord and plug it back in if "RESET FIN-
ISHED" appears.
• Please note that resetting the microcomputer will clear the
contents of the memory and return the unit to the state it was
in when it left the factory.
Check that following guide for problem resolution.