Timer; Sleep Timer - Philips FW-C72 Manual

All manuals and user guides at all-guides.com
23
• To exit without storing the setting,
press Ç on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to CD,
TUNER, or TAPE 2 mode
automatically at a preset time. It can
serve as an alarm to wake you up.
• Before setting the timer, make sure
the clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum
level until the volume level
before the set is switched to
standby mode.
1 Press and hold CLOCK/TIMER for
more than two seconds to select
timer mode.
™ " AM 12:00" or "00:00" or
the last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
™ The starts flashing.

TIMER

pg 01-27/C71-C72/37-Eng 23
TIMER
™ The selected source is lit while – If the source selected is TAPE, and if
other available sources are the preset time is reached during high
flashing. speed dubbing, the TUNER will be
2 Press CD, TUNER or TAPE to selected instead.
select the desired source. – The timer will not activate if a recording
• Before selecting CD or TAPE, make is in progress.
sure a CD or tape is loaded in the
CD tray or tape deck 2. To switch off the TIMER
3 Press à or á on the system to set
1 Press and hold CLOCK/TIMER for
the hour for the timer to start. more than two seconds.
4 Press í or ë on the system to set 2 Press Ç on the system to cancel the
the minute for the timer to start. timer.
5 Press CLOCK/TIMER to store the ™ The timer is now switched off.
™ The display will show "OFF" and
start time.
™ The timer is now set.
™ The remains on the display.
TIMER
• At the preset time, the timer will be To start the TIMER again (for the
activated. same preset time and source)
™ The selected source will be 1 Press and hold CLOCK/TIMER for
played. more than two seconds.
2 Press CLOCK/TIMER again to
Notes:
store the start time.
– During timer setting, if no button is
™ The timer is now on.
pressed within 90 seconds, the system
™ The
will exit timer setting mode
automatically.
– If the source selected is TUNER, the
last tuned frequency will be switched
on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD
trays are empty, TUNER will be
selected instead.

SLEEP TIMER

Sleep Timer
control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.
1 Press SLEEP TIMER on the
remote control repeatedly to select a
period of time.
™ The selections are as follows (time
in minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 ...
the disappears. ™ "SLEEP XX" or "OFF" will be
TIMER
displayed. "XX" is the time in
minutes.
2 When you reach the desired length
of time, stop pressing the SLEEP
TIMER button.
™ After this amount of time passes,
the system will switch to the
standby mode.
appears on the display.
TIMER
To switch off the Sleep Timer
• Press SLEEP TIMER repeatedly
until "OFF" is displayed, or press the
STANDBY ON button.
12/16/99, 1:20 PM
(only on remote
3139 116 19521 (ENG)