Resetting To Factory Defaults - Belkin F5D4076 User Manual

CoNfIGUrATIoN
sections
table of contents
Adding Another Adapter to the Network
1. If the default network password has been changed, a new Adapter
will have to load the new password before it can join the network .
2. Press the "Encryption" button on an encrypted unit for more than 1
second, but less than three seconds .
3. Within two minutes, press the "Encryption" button on the new unit
for more than 1 second, but less than three seconds .
4. The new device has now been loaded with the network password
and added to the current powerline network .
Gigabit Powerline HD Networking Adapter
1
7
2

resetting to factory Defaults

Using a pointed object, press and hold the "Reset" button for one
second to restore defaults . This procedure resets the network password
to the default out-of-box value .
3 4