Gait up GO User Manual page 2

When the participant has understood the instructions and is ready to perform the test, press "Go", In
that moment, the Participant can start to perform the movement explained in the instructions shown
in the user interface of the application.
Fig. 66. Instruction and test start - iOS Fig. 67. Instruction test start - Android
NOTE: The wireless communication between the Physilog6 sensor device accessory and the mobile
phone / tablet is limited in distance. Do not separate the sensor device from the Gait Up GO mobile
application further than 5 meters (16 feet).
At the end of the test, if it did not automatically stop, tap the "End" button appearing on your screen
to complete the recording. The Gait Up GO medical device will analyze the recorded data.
Fig. 68. Recording ongoing
If the test has been successfully performed, a green check mark will appear on the screen, together
with the name of the test. Any comment about the performance of the test (f.ex. pain at the left hip)
can be optionally added. This comment will be displayed on the test report. Tap "Save" to register the
results and be able to generate a report.
ENGLISH 51/84