Advertisement
ATTENTION:
Service of this product to be done by nVent authorized personnel only . This product does not require maintenance after
proper installation . This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved .
Children shall not play with the appliance . Cleaning and user maintenance shall not be made by children
without supervision .
•
The installation is to be in accordance with the national wiring rules .The heating product must be supplied through a
RCD with trip rating 30mA maximum .
•
This equipment shall be installed only by qualified personnel who are familiar with the construction and operation of
the apparatus and risks involved .
•
Caution should be taken to guard against electric shock, fire and bodily injury during the installation of
this equipment .
•
De-energize power circuits before installation or servicing .
•
RAYCHEM Mat should not be connected to power until the RAYCHEM Mat is fully installed and covered by
flooring material.
•
Subfloor must be prepared in accordance with ANSI specifications.
•
The heating portion of the RAYCHEM Mat shall not touch, cross over, or overlap itself .
•
Do not install RAYCHEM Mat in direct contact with or within 0 .256" (6 .5 mm) of any combustible surfaces
or materials .
•
The minimum bending radius of the power lead is 2" (51 mm) and heating wire is 0 .625" (16 mm) .
•
The ambient air temperature must be above 10°C or 50°F when RAYCHEM Mat is installed .
•
RAYCHEM Mat is designed for indoor embedded floor heating applications and in wet areas
•
Minimum distance of 1.5" (38.1 mm) between adjacent heating devices.
•
Total combined R-values of all floor coverings must not exceed R-1 for 160 W/m
•
RAYCHEM Mat should not be altered .
•
RAYCHEM Mat is not for installation in pool and spa areas, nor outdoor use .
* Tile Adhesive must be made of a non-combustible material .
4 | nVent.com
mats .
2
Advertisement
