Reciprocating Saw Safety Warnings; Component List; Technical Data - KRESS KU401 Manual

tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected
situations.
5) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
RECIPROCATING SAW
SAFETY WARNINGS
1. Hold reciprocating saw by insulated
gripping surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring. Cutting accessory
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
2. Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the workpiece by hand
or against your body leaves it unstable and may
lead to loss of control.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Warning

COMPONENT LIST

1.
TRIGGER SWITCH
2.
PENDULUM ACTION CONTROL
3.
TOOL-LESS BLADE CLAMP LEVER
4.
BLADE HOLDER
5. SAW BLADE﹡
6. PIVOTING FOOT PLATE
TOOL-LESS FOOT PLATE ADJUSTING
7.
BUTTON
8. VARIABLE SPEED DIAL
9. SOFT GRIP HANDLE
﹡Not all the accessories illustrated or described
are included in standard delivery.

TECHNICAL DATA

Type KU401(4-designation of machinery,
representative of Reciprocating Saw)
Voltages:
Power :
No-load speed
7
EN
220V~50Hz
1400 W
0-2800r/min