Cutting Width Adjustment - Baby Lock BL-101 Service Manual

11. CUTTING WIDTH ADJUSTMENT

a) Cut 1 layar cotton fabric
and make a cutting width 3.7 0.1mm
between the eye of needle and the edge
of fabric.
Machine Settings
Needle : Right Needle(O2)
Thread : No Use
Stitch Width : M
Stitch Length: 2.5
Differencial feed : N
Fabric : Cotton broad 1 layer
b-1) Cutting width adjustment
Loosen fixing screw of knife holder,
and adjust knife holder right or left.
tighten the screw.
Make sure cutting width.
b-2) Cutting width adjustment
Loosen fixing screws of knife holder,
and knife driving shaft.
Turn Knife driving shaft crockwise or
counter-clockwise.
Make sure cutting width.
c) Rotate the stitch width dial to min.
3.0/5.5mm, distance between lower
knife and needle plate is more than
0.5mm.
+
Fixing screw
of knife driving
shaft
9
+
3.7
Fixing screw
of Knife holder
5.5
3.0
Knife driving
Fixing screw
shaft
of Knife holder
0.5mm
0.1mm
5.5
3.0
.