Table of Contents
Advertisement
Z
11. Experiment by moving the device slowly and/or quickly
12. Clean the treated area: Apply a facial lotion or mask
7. Cleaning, maintenance & storage
Clean the device after each treatment.
[
U
U
U
Z
FaceTite 3.0 China 7351A ALL ED521-08 clean.indd 15
FaceTite 3.0 China 7351A ALL ED521-08 clean.indd 15
You will feel the skin temperature increase as the RF
energy gets to work and as you increase the energy level. It
usually takes about 1-2 minutes for the device to reach the
required temperature. During the treatment your skin will
get a little red. Don't worry; this is normal.
across the area you're treating until you get the rhythm and
speed that suits you. Each person has their own preference.
immediately after treatment.
Never immerse your device or any of its parts in
water!
Put the device in standby mode, then unplug it.
Use absorbent paper (such as toilet paper or wipes) to
remove the gel residue off the treatment surface (#1). Make
sure you remove all gel residue to prevent the gel from
solidifying or damaging the device.
Use a clean damp cloth to clean the device and the
treatment surface (#1).
You may use cleaning fluids with up to 70%
alcohol, but never use acetone or other
abrasive liquids, because they will damage
your device.
15
12/05/2020 13:05:52
12/05/2020 13:05:52
Advertisement
Table of Contents
