Download Print this page

iPECS Vertical Edge IP 9830 Quick Start Manual

iPECS Phone Connection

Last Modified on 10/23/2018 4:43 pm EDT

If you need help:

E-mail

service@vertical.com

Call us at 877-VERTICAL (877-837-8422)

Vertical Edge IP 9830 Handset

Your iPECS phone comes with a stand, handset with handset cord, and Ethernet cable.

Connect headset & handset

Phone ports on back of Edge IP

phones (your phone may have

slight differences depending on

model)

Connect the handset cord to the Handset port on the bottom of the phone.

If you are using a headset, connect the headset cord to the Headset port.

Table of Contents

Do you have a question about the Vertical Edge IP 9830 and is the answer not in the manual?

Page 1 Call us at 877-VERTICAL (877-837-8422) Vertical Edge IP 9830 Handset Your iPECS phone comes with a stand, handset with handset cord, and Ethernet cable. Connect headset & handset Phone ports on back of Edge IP phones (your phone may have...
Page 2 Align the tabs on the stand with one of the pairs of notches on the bottom of the phone. You can choose a lower profile or higher profile setting. Push the stand upward in the slots as far as it can go until firmly attached. If you need help, contact iPECS Support...