Table of Contents
Advertisement
www.ces.eu
8. Shorten the connecting cable and strip back the cable to reveal the strands (5–
6 cm).
9. Guide the cable strands through the cover cap and wire them to the terminal
in accordance with the connection diagram.
Risk of damage Perform all work on and in the device with the power
supply disconnected.
10. Attach the connection terminal.
11. Replace the cover cap.
Risk of equipment damage by entry of moisture
Careful sealing is required to satisfy protection class IP 65.
12. Seal the cover cap with the sealing tape provided.
13. Position the connecting cable in the surface-mounted frame and place the
reader onto it.
Advertisement
Table of Contents
