Assembly; Assembling The Reader - CEStronics AccessOne PHG Voxio Display Assembly And Operating Manual

5 Assembly

Target group of this section::
CEStronics partners
l
Electricians
l
Electricians with product training
l
IT/administration specialists
l
The reader is available in either a surface-mounted or a flush-mounted variant. The assembly varies between the two types.
Risk of damage Perform all work on and in the device with the power supply disconnected.

5.1 Assembling the reader

5.1.1 Assembling the flush-mounted variant
www.ces.eu
1. Slide the wall mount off the reader.
2. Screw the wall mount onto the DIN wall box or the wall itself. Observe the
marking 'TOP'.
3. Secure the tear-off tab for tamper detection with a screw.
4. Remove the cover cap from the reader.
5. Remove the connection terminal.