Electrolux EPM09CRC-A1 User Manual page 18

18 www.electrolux.com
How to Use the Remote Control
Turning the unit on
Plug in the unit, then press the "on/
off" button (when turned on, the unit
will operate as the last setting before
shutdown�
To switch the unit off, press "on/off" button
again, then remove the plug�
Always switch the unit off by pressing the
"on/off" button and wait for few minutes
before removing the plug�
Cool mode
Press the "mode" button until the left side
of LCD screen displays "cool"�
Press the "fan speed" button to choose
the fan speed "auto", "high", "mid", and
"low"�
Press the "
the temperature you want�
Dry mode
Press the "mode" button until the left side
of LCD screen displays "dry"�
At the same time, the "low" fan symbol
appears on the screen�
Note: In this mode, fan speed cannot be
selected�
+
" and "-" button to choose
Fan mode
Press the "mode" button until the left side
of LCD screen displays "fan"�
In this mode, you can select fan speed
"high", "mid" or "low" by pressing the Fan
speed button and referring to the diagram�
Note: In this mode, the air exhaust hose
does not need to be connected�
Heat mode (For Heat & Cool models only)
Press the "mode" button until the left side
of LCD screen displays "heat"�
Press the "fan speed" button to choose
the fan speed "auto", "high", "mid", and
"low"�
+
Press the " " and "-" button to choose
the temperature you want�
AUTO mode
Press the "mode" button until the upper
side of LCD screen displays "auto"�
Under AUTO mode, you can not select the
fan speed�
+
Press the " " and "-" button to choose
the temperature you want�