Sharp CD-XP120W Service Manual page 9

CD MECHANISM SECTION
Perform steps 1, 2, 3, 12, 13, 14 and 16 of the disassembly
method to remove the CD mechanism.
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T up/
down motor.
How to remove the loading motor
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the loading
motor.
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
All manuals and user guides at all-guides.com
– 9 –
(B1)x2
ø3x8mm
(A1)x4
ø3x8mm
Figure 9-1
(B3)x2
ø2.4x3mm
(B2)x1
Figure 9-2
Stop Washer
(C3)x1
(C1)x1
ø2.6x6mm
Pickup
CD
Mechanism
Figure 9-3
CD-XP120W
(B1)x3
ø3x8mm
Loading
Tray
(A3)x2
ø2.4x3mm
T/T Up/Down
Motor
(A2)x1
Loading
Motor
(C3)x1
ø2.6x6mm
Shaft
(C4)x1
Gear
(C2)x1