Zest 4 Leisure Horizon Arch Assembly Instructions

Assembly Instructions

Horizon Arch

Code: 00042

(W x D x H) 1.80m x 1.30m x 2.00m

This product is made from pressure-treated timber. It should not be painted

or coated with any other treatment until at least 6 months after purhcase

PLEASE KEEP THESE INSTRUCTIONS

www.zest4leisure.co.uk | 01352 752555 option 1 | sales@zest4leisure.co.uk

Table of Contents

Need help?

Do you have a question about the Horizon Arch and is the answer not in the manual?

Page 1 Assembly Instructions Horizon Arch Code: 00042 (W x D x H) 1.80m x 1.30m x 2.00m This product is made from pressure-treated timber. It should not be painted or coated with any other treatment until at least 6 months after purhcase PLEASE KEEP THESE INSTRUCTIONS www.zest4leisure.co.uk | 01352 752555 option 1 | sales@zest4leisure.co.uk...
Page 2 Horizon Arch Assembly Instructions Requires 2 person assembly Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, Tape Measure, 3mm Drill Bit will be required to drill screw holes during construction. Large Horizon Arch Pack List Item Description Quantity...
Page 3 Please take a few moments to check all pack contents listed Requires 2 person assembly Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, Tape Measure, Mallet, 3mm Drill Bit required in order for you to drill all screw holes before construction. 1. Position Rafters B 150mm from edge at both ends of Rails A and fix using 4no 70mm Screws - 2 per Rafter (Fig.1a).
Page 4 Please take a few moments to check all pack contents listed Requires 2 person assembly Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, Tape Measure, Mallet, 3mm Drill Bit required in order for you to drill all screw holes before construction. www.zest4leisure.co.uk | 01352 752555 option 1 | sales@zest4leisure.co.uk...

00042