Accessories ................................6 Overview of C-885 PIMotionMaster ........................6 Installation Power Source ............................... 7 Start-Up and Operation Configuration of the C-863.20C885 and Normal Operation of the C-885 PIMotionMaster ....... 8 Command Set of C-863.20C885........................... 8 Updating the Firmware Customer Service Technical Data Specifications ...............................
5. Click the desired manual and fill out the inquiry form. The download link will then be sent to the email address entered. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 4 / 14 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Safety Intended Use The C-863.20C885 is designed to be integrated in a laboratory device as defined by DIN EN 61010-1. It is intended to be used in interior spaces and in an environment which is free of dirt, oil and lubricants.
1/13/2021 Product Description The C-863.20C885 is a controller module for the C-885 PIMotionMaster (p. 6) from PI. It is based on the standard C-863 controller. In comparison to the C-863 controller, the C-863.20C885 controller module has two channels (= two Sub-D 15 (f) motor sockets) instead of one, is not installed in a case and has a reduced number of features.
20 controller modules Installation The C-863.20C885 must be installed in the C-885 PIMotionMaster (p. 6) from PI. See the documentation of the C-885 PIMotionMaster (p. 3) for more information. Power Source The maximum power consumption of the C-863.20C885 is 144 W.
Configuration of the C-863.20C885 and Normal Operation of the C-885 PIMotionMaster At the first start-up of the C-885 PIMotionMaster, the C-863.20C885 controller module has to be configured for the connected stages. Configuration of the controller module requires direct communication with the controller module.
Dimensions in mm. Note that the decimal places are separated by commas in the drawings. Figure 2: Dimensions of the C-863.20C885 Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 11 / 14 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Pin Assignment C-885.iD Digital Interface Module The C-885.iD digital interface module is connected to the C-863.20C885 controller module via a ribbon cable and a 10-pin connector strip of the C-863.20C885. See the C885T0002 user manual of the C-885 PIMotionMaster for installation details.
Instrumente (PI) GmbH & Co. KG ensures environmentally correct disposal of old PI equipment that was first put into circulation after 13 August 2005, free of charge. If you have old PI equipment, you can send it postage-free to the following address: Physik Instrumente (PI) GmbH & Co. KG Auf der Roemerstr.
Need help?
Do you have a question about the C-863.20C885 and is the answer not in the manual?
Questions and answers