7" flat panel color observation monitor (14 pages)
Summary of Contents for ASA Electronics FlexVision LCM1511WTV
Page 1
LCM1511WTV COLOR LCD MONITOR WITH TV TUNER OWNER’S MANUAL Audiovox Specialized Applications, LLC 23319 Cooper Drive Elkhart, IN 46514 800-688-3135 www.asaelectronics.com...
Page 2
PACKING Monitor Remote Control Interface Cable 12V Power Cord Batteries: Size AAA x 2 Mounting Hardware Manual WARNING...
TABLE OF CONTENTS 1. LCM Monitor LCD, Tuner Pack, IR Remote Controller 2. Feature Function, IR Remote 2-1 Power 2-2 Input Signal Detection 2-3 Contrast/Color/Brightness Adjustment 2-4 Volume Adjustment 2-5 Audio Mute 3. Manual Functions 3-1 Key Functions 3-2 Volume Control 3-3 OSD Icons and Functions Description 3-4 Video Adjustments Reference table of OSD Functions and Descriptions...
Page 4
Rear A. VGA Input B. DC 12V IN A. IR Eye E. ADJ+ B. Menu F. Power LED C. Select G. Speakers D. ADJ- H. LCD Panel C. A/V D. Interface Cable to Tuner AUX Page 1...
LCD, Tuner Pack, IR Remote Control Remote Controller POWER ON/OFF CHANNEL SELECT VOLUME ADJUST +/- COLOR COLOR TV/AV MUTE CONTRAST CONTRAST BRIGHT Page 2 MENU SPKR ON/OFF BRIGHTEN...
2. Feature Function, IR Remote 2-1 Power Pointing the remote towards the IR eye on the LCD, press and hold the POWER On/Off button on the remote controller unit until it turns on the system. Repeat this procedure to turn off system. Power On- The LCD monitor will light up, and the green power light on the front panel will be ON.
Page 7
Press the Mute button to disable audio output. The screen will display “Mute” on upper right corner of the monitor. To cancel mute status, just press Mute key again. The “Mute” message on upper right corner will disappear. Page 3...
3. Feature Functions by Manual 3-1 Key Functions There are 4 buttons on the monitor which are “Menu”; “Select”; “-“; and “+”. (1) MENU: Pop up & close the OSD (On Screen Display) menu. (2) SELECT: Steps between the function ICONS when OSD menu is on.
Page 9
The screen will display the one that you choose, then use the volume s or t to adjust it. If you take longer than 4 seconds to adjust, the menu display will disappear . The system will reset to s or t Volume. Page 4...
The Reference table of OSD Functions and Descriptions Mark Function Brightness Contrast Color Hue (A/V) / Phase (PC) Volume H. Position V. Position H. Size V. Size Expansion Mute Speaker Signal Source Select Filter System (A/V) Reset- Default PWR- On/Off Keyboard Adjust (-)G (-)L...
4. Feature Functions 4-1 No Signal Detection The monitor will detect signal input automatically. If the signal source is OFF or removed, there is a“ blink on the upper right corner of Signal Input”. The system will go to power saving mode when there is no signal input for 1 minute.
5. Tuner Functions: (Performed only by IR Remote) 5-1 Power Press and hold the POWER On/Off button on the IR remote controller unit the system turns ON. Repeat this procedure to turn the power off. Power-On: The LCD monitor will light up, and the green LED on front panel of the monitor will be On.
Page 14
memory. The screen will display “AUTO” in the lower left corner while the unit is programming. There are two groups of memory. One for TV and another is for CATV. This function is valid only in TV or CATV mode. NOTE: If you want to interrupt the auto programming mode, just press the Channel s or t button.
5-4 Input Signal Detection Tuner system will detect a signal if a signal is received in every mode of signal input. If there is no signal, the screen will display “No Signal”. Otherwise, the signal will be displayed showing the mode. 5-5 Channel Selection Use s or t button for channel selection.
5-9 Audio Mute Press the MUTE button to disable audio output. Screen will display “MUTE” on the upper right corner of the monitor. To cancel mute status, just press the MUTE key again. The “Mute” message on upper right corner will disappear. Page 8...
6. Installation of Monitor and Tuner Pack 12V Power cable Note: Filtering device inside for automotive use. To Ext. Antenna or Cable Connection To second Video Monitor (not required) Monitor Rear View VGA Input DC 12V In Tuner/Front View Ant. Cable A/V 2 Input Tuner/Rear View...
7. Installation Procedure The monitor is furnished with a metal bracket consisting of 8 mounting holes, located in corners of the flange. The mounting holes will accommodate #10 screws. 1) Locate a mounting hole position that will allow a 2 ¼” depth in wall.
8. Specifications Power Input/ Consumption Audio/Video Input Operating Temperature Storage Temperature Resolution Back Light View Angle L/R View Angle U/D Power Adapter Monitor Dimensions Monitor Weight PC VGA Input Graphics Mode Color Depth Frame Memory On Screen Display (OSD) Power Saving Mode User Setting DC12V 10% <...
10. Optional Product List AVT988 9” Color Television with Remote (12V) AVT1498 13” Color Television with Remote (12V) AVP7000 Video Cassette Player (12V) AVP7285 Video Cassette Player (12V) Single Disc DVD Player Wireless Headphones Headphones with Pivoting Earcup Headphones with Volume Control on Cord Studio Quality Headphones Remote Controls Wallmount Family Radio Service with 4 Handsets...
Need help?
Do you have a question about the FlexVision LCM1511WTV and is the answer not in the manual?
Questions and answers