Operation; Overhead Dome Lights; Remote Sensor - ASA Electronics 856 Owner's Manual

OPERATION

Overhead Dome Lights

This lights integrated into the LCM0802TV are
controlled by a three position slide switch. Sliding the
switch to the on position will turn the lights on. The off
position will prevent the lights from turning on at all
times and the auto position will allow the lights to turn
on and off with the vehicle's interior lighting. Do not
leave the vehicle unattended with the dome light
switch in the on position, as this could result in a
discharged battery.
Dome Light Switch

Remote Sensor

The LCM0802TV incorporates an infrared sensor,
which relays the signals from the remote control to
allow the LCM0802TV and VCP to be controlled
simply by pointing it's remote control at the remote
sensor. This provides control of auxialiary
equipment such as an Flexvision Video Cassette
Player. The infrared sensor can relay signals from
any manufacturer's remote control to it's respective
component connected to the Video 1 and 2 inputs,
such as a DVD player. In this case you must use
the remote control supplied with the DVD player.
-10-
Remote Sensor