Care And Maintenance; Cleaning; Lubrication - Kobalt KPM 1040B-03 Manual

CARE AND MAINTENANCE

WARNING
• All maintenance should only be carried out by a qualified service technician.
• Before cleaning or performing any maintenance, remove the battery pack. For safe and
proper operation, always keep the tool and its ventilation slots clean.
• When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage.
• Always wear safety goggles or safety glasses with side shields during power tool operation
or when blowing dust. If the operation is dusty, also wear a dust mask.
• Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils,
etc. come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic,
which may result in serious personal injury.

12. Cleaning

WARNING
• Always remove the battery pack when servicing or transporting the mower.
• When cleaning the mower, DO NOT immerse in water or other liquids.
The underside of mower deck should be cleaned after each use, as grass clippings, leaves,
dirt and other debris will accumulate. This accumulation is undesirable, as it will promote rust
and corrosion.
Remove any build-up of grass and leaves on or around the drive shaft and motor fan (do not
use water). Wipe the mower clean with a damp cloth.

13. Lubrication

Lubricate with light oil as directed below at least once each mowing season.
• To prevent rusting, periodically lubricate the following parts with light oil:
a. the lock pin of the handle-adjustment knob
b. the torsion spring and pivot rod of the rear-discharge door
• Place the mower into the locked storage position, place the folded mower upright on the
ground.
a. Lubricate the deck-height adjustment joint.
b. Lubricate the bearings in the front wheels and rear wheels.
21