Jp14 Clear Cmos - AOpen D X37PU-EG-E0110A Easy Installation Manual

Everything you need to boot this
motherboard is included in this
Easy Installation Guide. For more
information, a complete
User's Manual can be found in the
Bonus Pack CD Disc. Thanks for
the help of saving our earth.
Hard Drive IDE Cable x 1
80-Wire IDE Cable x 1
Floppy Drive Cable x 1
Ultra 160 SCSI 68 pin Cable x 1
Bonus Pack CD disc x 1
User Manual x 1
This Easy Installation Guide x 1
I/O Bracket x 1
ASM Lite x 1
SCSI Utility Driver x 1
PART NO: 90.53G30.002 DOC. NO: D X37PU-EG-E0110A
You can clear CMOS to restore system default setting. To
clear the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few s econds.
4. Return JP14 to its normal setting by shorting pin 1 & pin 2.
Online
5. Connect ATX power cable back to connector PWR2.
Plug in the CPU fan cable to the 3-pin CPU1 FAN and CPU2 FAN connector. If you have chassis fan, you
can also plug it on System FAN (FAN2) or AUX FAN (FAN3) connector.
FAN2
Connector
+12V
SENSOR

1. JP14 Clear CMOS

1 1
Normal
Clear CMOS
(default)
2. Installing CPU & System Fan
GND
FAN1 Connector
FAN3 Connector
CPU1 Fan Connector
SENSOR
+12V
Note: Some CPU fans do not have
sensor pin so they cannot support fan
monitoring.
GND