Troubleshooting - NewAir NIM044BS00 Owner's Manual

TROUBLESHOOTING

Problem
"Add Water"
indicator lights up
"Ice Full"
indicator lights up
or flash
LIGHT and ICE icon
flashing
Making Ice too
slowly
Water leakage
www.newair.com
Possible Causes
Lack of water.
There is too much ice.
No ice cube inside.
Ambient temperature or
water temperature in
inner tank is too high.
Refrigerant liquid
leakage.
Cover motor is broken.
Pipe in the cooling
system is blocked.
Hot Air outlet is blocked
by something.
Water temperature in
inner tank is too high.
Refrigeration system
malfunctions.
Drain plug not in place.
Pipe Joint in the ice
maker is loose.
The seal has reached
service life.
Solution
Stop the ice maker, fill
water, and press "ICE"
button again to restart.
Remove the ice from the ice
drawer.
Check for any obstacles
blocking production.
Press "ICE" button for 5
seconds.
Please run the ice maker
below 90 Fahrenheit degree
ambient and pour colder
water into tank.
Press the "ICE" button
twice, wait for 50 minutes. If
this problem happens up
again, check with a qualified
technician.
Hot Air outlet must have
more than 15 CM of
ventilation distance on
either side.
Water temperature
requirement between 7℃-
32℃.
Check with a qualified
technician.
Put the drain plug in place.
Check with a qualified
technician.
Check with a qualified
technician.
EN
17