Advertisement
TROUBLESHOOTING
Problem
The "ADD WATER"
indicator light is on.
The "ICE" indicator light
is on.
The "ADD WATER" and
"ICE" lights are both
flashing.
The ice making cycle
appears to be normal
but no ice is being
produced.
The ice cubes are too
small.
The ice has a "plastic"
taste.
9
Possible Cause
There is not enough
water in the tank.
The ice basket is full.
The ice shovel may be
incorrectly positioned.
Ice may be blocking
the sensor.
The refrigerant may
be leaking.
A pipe in the cooling
system may be
blocked.
The ambient
temperature or water
temperature may be
too high.
The compressor may
need to warm up.
The unit's interior may
need to be cleaned.
Solution
Press the "POWER"
button to turn off the
unit. Fill the reservoir
with water. Press
"POWER" to restart.
Remove ice from the
basket.
Make sure the ice
shovel is properly
positioned.
Remove any ice that
may be blocking the
sensor.
Consult a qualified
technician.
Consult a qualified
technician.
Select large sized ice
cubes by pressing the
"SELECT" button.
If this is the first time
the unit is being used,
allow the ice maker to
cycle a few times. This
should result in larger
cubes.
Add a tablespoon of
lemon juice or vinegar
to a full tank of water
and allow the ice maker
to cycle a few times.
Hide quick links:
Advertisement
