Care Of Your Watch - Wired W36 Series Instruction Manual

CAUTION
■ CARE OF YOUR WATCH
・ The case and bracelet touch the skin directly just as underwear. If they are left dirty, the edge of a
sleeve may be stained with rust of those who have a delicate skin may have a rash.
・ Please Wipe away moisture , sweat or dirt with a soft cloth.
・ To clean the clearances(around the metal bracelet, crown or case back), a soft toothbrush is convenient.
・ After soaking the watch in seawater, be sure to wash the watch in clean pure water and wipe it
dry carefully.
・ In order to prevent corrosion of the crown, turn the crown from time to time.
・ The same practice should be applied to a screw lock type crown. (No need to pull out the screw
lock type crown.)
METAL BRACELET
・ Clean the watch bracelet with a soft toothbrush dipped in water or soapy water. If your
watch is not water-resistant, be careful not to get the case wet when cleaning.
LEATHER BAND
・ When removing moisture from a leather band, do not rub the band with the cloth
as this may discolor it or reduce its gloss. Be sure to blot up the moisture using
a soft dry cloth.
76
TO PRESERVE THE QUALITY OF YOUR WATCH
SOFT PLASTIC BRACELET
If your watch has a soft plastic band such as urethane band, do not leave the watch under a ・ If your watch
has a soft plastic band such as urethane band, do not leave the watch under a fluorescent lamp or direct
sunlight for a long time, or do not leave the band soiled. Otherwise, the band may be discolored, hardened
or broken. Also, do not keep the watch in a place where it is exposed to high humidity, or do not leave the
band wet with perspiration or water. Otherwise, the band may be discolored in a very short time.
When the band is soiled, rinse it in soapy water. Do not use solvents for cleaning as some solvents may
deteriorate the band.
If your watch has a semitransparent urethane band which is easily discolored, special care should be taken
to keep it clean. Depending on the condition of use, the semitransparent band may be discolored after
several months of use.
■ If your watch is not water-resistant, be careful not to get wet with water or sweat. When
it gets wet with water or sweat, wipe it thoroughly dry with a hygroscopic cloth.
■ If your watch is 5, 10 or 20 bar water resistant, rinse it in a bowl of fresh water after
used in seawater. Do not use chemicals to wash it.
■ If your watch has a rotating bezel, clean the bezel regulary. Otherwise, dust will
gather under it, making the rotation harder.