Adjust The Time By Receiving Radio Signals - Wired W36 Series Instruction Manual

Adjust the Time by Receiving Radio Signals (How to Carry Out Manual Reception)
Place a watch
1
The antenna for receiving
radio signals inside the watch
is at the 12 o'clock position.
Turning the antenna toward
the outside of the window
enables the watch to receive
radio signals more easily.
Remove the watch from your wrist and place
it in a location that can easily receive radio
signals, for example, close to a window.
※ Reception functions when the home time city code is TYO (Tokyo), SEL (Seoul), or HKG (Hong Kong). (This watch receives the official standard frequency of Japan.)
58
Press button f or two sec or more.
2
Pressing button
displays [RECEIVE]
as shown above.
Press button for two sec or more with the
home time mode time display.
※ Reception cannot be performed in other modes than the home time mode.
Wait for a while with your watch is placed down.
3
It will take 13 min at maximum for reception.
Radio signal strength is displayed in four stages. (Updated every second)
Streaming animation indicating reception is displayed.
Please wait until the reception is completed without moving your watch.
Without wearing your watch, wait while placing your watch down and allowing it to remain still.
※ Pressing any button during reception cancels the reception.
Radio signal level display
Unstable Stable