4
Could be
received
Could not
be received
The display indicates that reception is completed.The display continues for 10 sec.
After 10 sec or by pressing button once, it is reset to the home time mode.
※ Reception can be successfully performed depending on the weather and reception environment.
※ Reception cannot be performed outside the radio signal reception range.
Reset to the home time mode
After 10 sec
or
press once
After 10 sec
or
press once
If reception cannot be properly performed,
change the location or direction of the watch. Also, the reception
environment varies even in the same location depending on the
time zone. Radio signals can easily be received during nighttime
hours due to its characteristics.
If this message is displayed
Nothing
is
displayed.
The watch has been set to a mode for
which reception cannot be performed.
Refer to the following page for resetting.
59