Advertisement
Quick Links
Hitch Bike Rack (2/3/4 Bike) w/Anti-Rattle Hitch Tightener
OWNER'S MANUAL
WARNING! CAUTION!
Read carefully and understand all ASSEMBLY AND/OR OPERATION
INSTRUCTION before using the product. Failure to follow the safety rules
and other basic safety precautions may result in serious personal injury.
Item# 005-TH-2BIKEHP / 3BIKEHP / 4BIKEHP
Advertisement
Related Manuals for ARKSEN 005-TH-2BIKEHP
Summary of Contents for ARKSEN 005-TH-2BIKEHP
- Page 1 OWNER’S MANUAL WARNING! CAUTION! Read carefully and understand all ASSEMBLY AND/OR OPERATION INSTRUCTION before using the product. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 005-TH-2BIKEHP / 3BIKEHP / 4BIKEHP...
- Page 2 owner’s manual Thank you for purchasing our product. This manual covers operation and maintenance information about the product. Read carefully and understand all instruction before using the product. All information in this publication is based on the latest product information available at the time of approval for printing.
-
Page 3: Specification
• Always ensure the loads on the rack and check frequently. • Make sure all pins are secured before use. • SAVE THESE INSTRUCTIONS SPECIFICATION Model Number 005-TH-2BIKEHP 005-TH-3BIKEHP 005-TH-4BIKEHP 2 bikes 3 bikes 4 bikes Load Capacity 70 lb... - Page 4 owner’s manual ASSEMBLY INSTRUCTION HARDWARE LIST...
-
Page 5: Hardware List
owner’s manual HARDWARE LIST Shock Absorbing kit Tie Down Strap / Stabilizer Strap 2BIKEHP / 4x 3BIKEHP / 6x 4BIKEHP / 8x Anti-Rattle Hitch Tightener... -
Page 6: Assembly Instruction
owner’s manual ASSEMBLY INSTRUCTION NOTE: The nuts supplied with the rack have nylon thread locker at the end of each nut. Once the threads of the bolt reach the thread locker, you will feel resistance as you tighten the nut and bolt. Continue to tighten until it is secured. - Page 7 owner’s manual ASSEMBLY INSTRUCTION Insert the upper mast into the lower mast. Line up the holes on both masts and insert a 2 ½” bolt through each hole. Threads the nuts onto each bolt and securely tighten. Insert the shock absorbing bracket into the square tube.
- Page 8 owner’s manual ASSEMBLY INSTRUCTION Install the rack to the car by inserting the hitch connection into the 2” hitch receiver on the car. Line up the holes on the connector to those on the receiver. Insert a 3 ½” bolt through the holes in the receiver and the rack connection.
-
Page 9: User Instruction
owner’s manual USER INSTRUCTION LOADING THE BIKES • Before loading the bikes onto the rack, rotate the mounting saddles to their upright position. Use the included hex wrench to tighten the saddle mount on the arm if necessary. NOTE: Do not over-tighten! The saddles should be able to rotate and slide back and forth with minimal effort to allow optimum positioning of the bikes on the rack. - Page 10 owner’s manual USER INSTRUCTION LOADING THE BIKES • Load the bike in saddle and the heavier bike closer to the vehicle. • Use the provided straps (part 12) to wrap the bikes to the rack to provide extra security. ATTENTION! Make sure the total weight of the bike load is within the weight capacity of the rack or the vehicle.
- Page 11 owner’s manual USER INSTRUCTION LOWERING THE RACK FOR TAILGATE / BACK DOOR • Before lowering the rack, make sure no bike is loaded on the rack. • Remove the lower pin and allow the rack to rotate away from the back of the vehicle. When using this feature, open the tailgate / back-door slowly and make sure there is enough clearance between the tailgate / back-door and the rack to prevent any damage on the vehicle.
Need help?
Do you have a question about the 005-TH-2BIKEHP and is the answer not in the manual?
Questions and answers