Subscribe to Our Youtube Channel
Related Manuals for Bona FlexiSand DCS Buffer AMO310010.2
Summary of Contents for Bona FlexiSand DCS Buffer AMO310010.2
- Page 1 Bona FlexiSand DCS Buffer ® OPERATING MANUAL To register your machine visit Bona.com/register...
- Page 2 Foreword Bona FlexiSand DCS Buffer Manual ® For a new manual contact: Bona US 24 Inverness Place East, Suite 100 Englewood, CO 80112 Tel +1 303.371.1411 +1 800.872.5515 Fax +1 303.923.1461 www.Bona.com Bona.com 800.872.5515...
-
Page 3: Table Of Contents
Table of Contents Technical Data Material Specification Safety Instructions Bona FlexiSand DCS Buffer in General Normal use Risks Handling Assembling the dust skirt Attaching dust containment Attaching a vacuum cleaner Starting the machine Transport position The sanding process Maintenance, Service & Repairs... -
Page 4: Technical Data
Hour counter: <99,999 hours Height/Width/Depth: 46"/19.3"/25.2" (1170mm/490mm/640mm) We congratulate you on your purchase of the Bona FlexiSand DCS Buffer, a powerful and versatile machine ® for sanding, oiling and polishing hardwood floors! Carefully read through the entire user manual before you begin working with the machine. -
Page 5: Material Specification
Material Specification Standard (included on delivery) Article Article Number Bona FlexiSand DCS Buffer AMO310010.2 ® Bona Pad Driver ASO312511 Dust Skirt ASO312102 Dust Tube ASK3199940006 Power Cord (25' 14/3) AS15373990 Face Mask, Ear Caps (Compl.) ASO991232 Box Spanner (Tool) ASO990640 - L Type Wrench 19mm Bona DCS Buffer "Illuminator"... -
Page 6: Safety Instructions
The safety routines below must be followed: Cigarette lighters, control lamps and all other sources of ignition can cause explosions if they • are active during sanding. All sources of ignition should be extinguished or, if possible, removed completely from the work area. Bona.com 800.872.5515... - Page 7 Safety Instructions (Cont.) In work areas with poor ventilation, an explosive environment can occur if certain flammable • materials (solvents, thinners, alcohol, fuel, certain polishes, wood dust, etc) are in the atmosphere. Floor grinders can cause slightly flammable materials and vapors to burn. Read the manufacturer's label on all chemicals to be used so that you can determine the flammability.
- Page 8 ® To minimize dust in the environment use a vacuum cleaner intended for wood dust. The air flow on the vacuum cleaner should be at least 245m³/h. We strongly recommend a Bona Dust Containment System for best results. Store contained wood dust outdoors in a safe place due to the risk of fire. Never leave contained wood dust unsupervised.
-
Page 9: Bona Flexisand Dcs Buffer In General
Service and repairs must be performed by Bona or staff approved by Bona. Be aware when you work. Use common sense. Do not use the machine if you are tired, have consumed alcohol or have taken medication that can affect your judgment or your body control. -
Page 10: Risks
Bona FlexiSand DCS Buffer in General (Cont.) Bona FlexiSand DCS Buffer Manual ® Normal use (cont.) The user is expressly obliged only to use the machine in accordance with this manual. If the machine is used in any other manner, this is solely at the user's own risk. -
Page 11: Assembling The Dust Skirt
Never use the dust skirt when staining or oiling. Always remove the skirt when transporting the machine. Attaching dust containment Attach the dust containment hose to the dust tube on the Bona FlexiSand DCS Buffer. If using Bona DCS , connect DCS cuff to dust ®... -
Page 12: Starting The Machine
If the machine becomes difficult to handle, release the start handles and the machine will stop immediately. If you have not operated a Bona FlexiSand DCS Buffer previously, ensure that no ®... -
Page 13: Transport Position
Handling (Cont.) Transport position Tip the machine backwards and remove the dust skirt. Remove the sanding disc. Pull out the front carry handle and fold the Grip the machine as shown in the photo. handle shaft. NOTE: Always remove the dust skirt and sanding disc before transportation. When transporting the machine on a vehicle, make sure the machine is securely fastened through the wheels. -
Page 14: The Sanding Process
The sanding process The Bona Power Drive system is designed to be used in a variety of different sanding situations. However, it is not designed to replace a traditional belt sanding machine and where a floor is uneven due to cupping or similar issues it is recommended that an initial sanding using a belt sander with a 36/40 grit belt is made. -
Page 15: Maintenance, Service & Repairs
Only Bona's original parts may be used because the machine is considered unique, otherwise safety functions can become impaired. When you contact Bona or staff approved by Bona in the event of a fault or to order spare parts, always specify the type and serial number of your machine. -
Page 16: Spare Parts And Exploded Views
There is a 24 month factory warranty (from the date of invoice) against material and manufacturing faults. In the event of a warranty claim, the machine or agreed upon part must be returned to Bona or staff approved by Bona with paid freight for warranty testing and for potential repair or replacement under warranty. -
Page 17: Additional Notes
Additional Notes... - Page 18 Additional Notes (Cont.) Bona FlexiSand DCS Buffer Manual ® Bona.com 800.872.5515...
- Page 19 Additional Notes (Cont.)
- Page 20 Bringing out the best in hardwood floors. At Bona, we are committed to the lifetime of hardwood floors. We are devoted to providing solutions that keep a floor perfect during its entire life. Through our long commitment and constant search for innovation we offer lasting, sustainable results for professionals and floor owners.
Need help?
Do you have a question about the FlexiSand DCS Buffer AMO310010.2 and is the answer not in the manual?
Questions and answers