Foreword Bona ® FlexiSand Power Drive Manual ™ For a new manual contact: Bona US 2550 S. Parker Rd. Suite 600 Aurora, CO 80014-1622 Tel +1 303.371.1411 +1 800.872.5515 Fax +1 303.923.1461 www.bona.com bona.com 800.872.5515...
Spare parts and exploded views Warranty Bona FlexiSand Power Drive in General ™ ® Normal use Risks Handling Assembling the dust skirt Assembling the FlexiSand Power Drive™ Attaching dust containment Using the FlexiSand Power Drive™ The sanding process Transport position Additional Notes...
FlexiSand Power Drive , a powerful and versatile ™ ® machine for sanding, cleaning, buffing, and oiling wooden floors! With the Bona FlexiSand Power Drive ® ™ attached, you are able to perform direction-free sanding to bare wood. Four counter-rotating discs provide a high cut rate which can reach very close to the wall and as such reduces the need for edge sanding.
Material Specification Standard (included on delivery) Article Article Number AMO310002.2 Bona FlexiSand Power Drive ® ™ Bona Pad Driver ASO312511 ® Dust skirt ASO312102 Dust tube ASO316650 Extension cable 50 ft (15.2m) ASO904015 Face mask, ear caps (compl.) ASO991232 Box spanner (tool) ASO990640 - L Type Wrench 19mm ™...
Drive Plates & Accessories Bona FlexiSand Power Drive Manual ® ™ Recommended Article Application Abrasives & Equipment Standard drive plate for a wide variety of jobs. Equip Bona Abrasive Pads ® ™ Bona Pad Drive , 16" ® with a suitable pad for...
Safety Instructions DANGER means: You or other staff can suffer a serious injury or death if the instructions marked with DANGER on this machine or in these user instructions are ignored or not followed. Read the entire user manual before you use the machine. WARNING means: You or other staff can suffer an injury if the instructions marked with WARNING on this machine or in this user manual are ignored or not followed.
Page 8
Safety Instructions (Cont.) Bona ® FlexiSand Power Drive Manual ™ Never remove or disable the ground in the electric cable. Consult an electrician if the ground is missing or if you suspect that your circuit is not properly grounded. There is a risk of electric shock if the machine is used in a circuit that breaks repeatedly or is under- sized.
Page 9
Safety Instructions (Cont.) To minimize dust in the environment use a vacuum cleaner intended for wood dust. The air flow ™ on the vacuum cleaner should be at least 245m³/h. We strongly recommend the Bona ® for best results. Store contained wood dust outdoors in a safe place due to the risk of fire. Never leave contained wood dust unsupervised.
Service and repairs must be performed by Bona or staff approved by Bona. Be aware when you work. Use common sense. Do not use the machine if you are tired, have consumed alcohol or have taken medication that can affect your judgment or your body control.
Only Bona's original parts may be used because the machine is considered unique, otherwise safety functions can become impaired. When you contact Bona or staff approved by Bona in the event of a fault or to order spare parts, always specify the type and serial number of your machine.
General ™ ® ™ The operation of the Bona FlexiSand Power Drive is subject to applicable national regulations. ® Beyond the user manual and the applicable rules in the country for preventing accidents, the applicable technical trade provisions for safety and professional work methods must be followed.
The machine's electrical components and mechanical parts can cause these substances to ignite. Never work with worn, damaged or incorrect equipment, which can cause damage to the floor. The power cable with extension may not exceed 50 ft (15.24m). Longer lengths should incorporate the Bona Power Station ™...
Place the dust skirt in the intended notch on the rubber strip. Never use the dust skirt when oiling. Always remove the skirt when transporting the machine. Assembling the FlexiSand Power Drive ™ Take the Internal Spur Gear (A), place it against the chassis...
Handling (Cont.) Attaching dust containment ™ ™ ™ Attach the dust containment hose to the dust tube on the Bona FlexiSand Power Drive . If using Bona , connect DCS cuff to ® ® dust tube and fasten with provided clamp.
Page 16
If you have not operated a Bona FlexiSand Power Drive previously, ensure that ™ ® no one or nothing is nearby before you start the machine. ™ Remember to connect the machine to a Bona or other suitable vacuum system before starting work. ® bona.com 800.872.5515...
'normal' buffing machine with the handles held at the waist and the machine ™ moving from side to side when sanding. The counter-rotating cog construction of the Bona FlexiSand Power Drive equalizes the sanding ®...
FlexiSand Power Drive system for the final sanding. When sanding prior to staining: It is important that scratches are not left on the floor as the staining process will highlight any remaining scratches. The Bona ® ™ FlexiSand Power Drive is perfect for the final preparation before staining.
Need help?
Do you have a question about the FlexiSand Power Drive and is the answer not in the manual?
Questions and answers