Emptying The Water Container - Amcor NanoMax A12000EH Owner's Manual

Emptying The Water Container

This air conditioning does not require emptying of the water
container, except prior to season end storage.
This portable AC features the
Innovative AutoDrain NanoMist Technology
Very little excess water should accumulate. During the process of
cooling, some of the water accumulated is actually used to cool the
unit internally, making it run more efficiently. Both this evaporative
technology and Innovative AutoDrain NanoMist Technology
features not found in most portable air conditioners.
Switch off the unit and remove the plug
from the outlet.
• Position a flat container or dish on the floor
under the drain hole. Do not allow the water to
drip continuously into the container as it might
easily overflow.
• Remove the drain knob.
• Remove the rubber plug, the water will flow in the
container. When this is nearly full, replace the plug to
stop the water flow and empty it. Repeat this process
until all water has been removed.
• Replace the rubber plug into the drain hole firmly,
the should not flash any longer.
water full led
• Replace the drain knob.
™
™
9
are
Rubber plug
Drain knob