Advertisement
Downloading the firmware update files from Pioneer's website
1.
Download the firmware update files by clicking on the following link and finding your product:
pioneerelectronics.com/firmware
2.
Locate the downloaded .zip file, extract the ***.scd file and copy it onto the USB device.
The Downloaded ZIP file will produce the following file when decompressed: (See the table below)
Model Name
Update necessary if:
Current version is 08.13 or lower
DEH-XXXX
Current version is 18.02 or lower
Current version is 28.02 or lower
Current version is 08.13 or lower
FH-XXXX
Current version is 18.02 or lower
Current version is 28.02 or lower
Current version is 08.13 or lower
MVH-XXXX
Current version is 18.02 or lower
Current version is 28.02 or lower
IMPORTANT
There may be more than one firmware update listed for your product. Please check your current firmware
version and copy to your USB storage device only the update file that corresponds to your receiver's
current firmware, as listed in the table above.
Updating the firmware on your Unit
IMPORTANT
•
DO NOT perform this firmware update if the model number of your Pioneer product is anything other
than one of the above models.
•
Ensure that the update file is located within the root (top) folder of your USB storage device. There
should be no other files within the USB storage device.
•
While your unit is being updated, DO NOT turn off the system's power and DO NOT touch the unit's
touchscreen as this may result in severe damage to your unit.
•
DO NOT remove the USB storage device during the firmware update process.
•
Performing the firmware update will restore all settings to their default values.
•
Disconnect any external mobile devices connected to your unit before starting the update process.
File name
20DEH_A0814.scd
20DEH_A1803.scd
20DEH_A2803.scd
20DEH_A0814.scd
20DEH_A1803.scd
20DEH_A2803.scd
20DEH_A0814.scd
20DEH_A1803.scd
20DEH_A2803.scd
Update
Version
08.14
18.03
28.03
08.14
18.03
28.03
08.14
18.03
28.03
Advertisement
