Film Related Settings - Konica Minolta DRYPRO 832 Manual

Film Related Settings

When changing from 14 x 17 inch to 14 x 14 inch or 11 x 14 inch
4
Use the supplied allen key to attach the film regulation pins to the speci-
fied locations (2 locations) with the hexagonal-socket screws� At this
time, line up the protrusion on the base of the film regulation pin with the
guide hole on the intermediate plate�
Allen wrench
Hexagon socket head screws
Film regulation pin
Protrusion
Guide hole
Intermediate Plate
(Cross section)
When changing from 14 x 14 inch or 11 x 14 inch to 14 x 17 inch
5
Use the supplied allen key to remove the film regulation pins (2 pins) for
the 14 x 14 inch or 11 x 14 inch films�
Be careful not to leave the film regulation pins (2 pins) or hexago-
nal-socket screws (2 screws) inside the supply tray, and make sure
you do not lose them�
Loading Films
6
Follow the steps from step 3 onwards, referring to [3�3 Loading Films]
(page 39) when loading films�
When "Ready" appears in the message display window, the machine is ready to
print.
Note: The type of Allen key included might differ
from that shown in the illustration.
52
Film regulation pin
mounting hole